EV Charger Permit Inspection Checklist in Seattle, Washington
Everything you need to apply for a ev charger permit in Seattle, Washington — documents, fees, steps, and a downloadable submission packet.
Key Facts
- Permit required
- Yes
- Submission method
- Online
- Typical fee range
- $300 – $578
- Review time
- Varies by jurisdiction
- Inspections
- 4 inspections required
Inspection Checklist (4 items)
Inspection requirements may vary by project. Always confirm specific inspection criteria with your inspector or local AHJ.
Generate your permit packet
Get a personalized EV Charger permit packet for Seattle, Washington — tailored to your project details.
- Required forms: Electrical Permit Application, and more
- Pre-filled templates: Permit Cover Sheet
- Fee breakdown: $100–$350 estimated total
- Step-by-step Seattle Department of Construction and Inspections portal submission guide
- Inspection prep checklist (4 items)
- Personalized for your specific project details
Free to preview · Pro to download
Required Documents
Seattle requires the following documents for this permit application.
Electrical Permit Application
Seattle SDCI electrical permit application for Level 2 EV charger installation at residential property
Electrical Load Calculation
NEC Article 625 compliant load calculation confirming main panel can support 50 amp dedicated circuit
Site Plan with Electrical Details
Installation diagram showing EVSE location, mounting details, circuit routing, panel location, and safety clearances
EVSE Specifications & Listing
Manufacturer technical specifications, UL certification, and nameplate information for Level 2 charging equipment
Licensed Electrician Certification
Washington State licensed electrician license verification and work plan confirming code-compliant installation
Permit Process
Follow these steps to submit your permit application through Seattle Department of Construction and Inspections.
- 1
Obtain Licensed Electrician & Prepare Documents
Hire Washington-licensed electrician and prepare all documentation per Seattle Electrical Code (based on NEC)
You'll need: Electrical Permit Application, Licensed Electrician Certification
- 2
Submit Permit Application
Submit electrical permit application and supporting documents (load calc, site plan, equipment specs) through Accela portal
You'll need: Electrical Load Calculation, Site Plan with Electrical Details, EVSE Specifications & Listing
- 3
Plan Review & Inspection Scheduling
SDCI conducts plan review for code compliance. Once approved, schedule electrical rough-in inspection.
- 4
Pay Permit Fee & Receive Permit
Pay electrical permit fee (typically $200-$350 for residential EV charger). Valid for 180 days from issuance.
- 5
Complete Installation & Schedule Final Inspection
Install EVSE after rough-in inspection approval. Schedule final electrical inspection for connection verification.
- 6
Final Inspection & Permit Closure
Pass final electrical inspection. SDCI issues permit closure and operation approval.
Fees and Timeline
Fee Breakdown
| Fee | Range | Confidence |
|---|---|---|
| EV Charger Permit Fee | $200 – $350 | Verified |
| Plan Review Fee | $100 – $228 | Verified |
Inspections Required
Dedicated 50 amp circuit breaker properly installed and clea
Dedicated 50 amp circuit breaker properly installed and clearly labeled
GFCI protection installed at outlet or on breaker per NEC re
GFCI protection installed at outlet or on breaker per NEC requirements
Proper wire gauge (8 AWG or larger) installed in approved co
Proper wire gauge (8 AWG or larger) installed in approved conduit
EVSE securely mounted with adequate clearances and meeting m
EVSE securely mounted with adequate clearances and meeting manufacturer specifications
Authority Sources
Data on this page is sourced from official records published by the permitting authority. Always verify requirements directly before submitting.
Seattle Department of Construction and Inspections
Last verified: February 15, 2026
2 sources referenced
Verified February 15, 2026
Verified February 15, 2026
Verified February 15, 2026
Frequently Asked Questions
- Do I need a ev charger permit in Seattle?
- Yes. Seattle requires a ev charger permit for this type of project. Submitting without a permit may result in fines, required removal, or complications when selling your property.
- How long does ev charger permit approval take in Seattle?
- Processing times in Seattle vary depending on project complexity and current review volume. The process involves 6 steps. Contact Seattle Development Services for current timelines.
- What documents are required for a ev charger permit in Seattle?
- Seattle requires 5 documents including Electrical Permit Application, Electrical Load Calculation, Site Plan with Electrical Details, EVSE Specifications & Listing, and others. See the full list above for details.
- What happens if I build without a ev charger permit in Seattle?
- Building without a permit in Seattle can result in stop-work orders, fines, required removal of work, difficulty selling your property, and insurance complications. It is strongly recommended to obtain proper permits before starting work.
- Can PermitMagic help prepare my ev charger permit submission in Seattle?
- Yes. PermitMagic generates a submission-ready packet tailored to Seattle's requirements, including a document checklist, workflow steps, and authority references. Start a permit plan to get your personalized packet.
- How much does a ev charger permit cost in Seattle?
- EV Charger permit fees in Seattle typically range from $300 to $578, depending on project scope. Fees may include building permit, plan review, and technology surcharges. Verify current fees with Seattle.
Related Permits
Other permits in Seattle
Ready to apply? Build your submission packet.
Answer a few project questions and get a ev charger permit packet for Seattle, Washington — with every document, form, and fee organized for submission.
Build My Permit PacketFree to preview · Pro to download